Students Information Park

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD III Year B.Tech EEE I CONTROL SYSTEMS AND SIMULATION LAB Any Eight of the following experiments are to be conducted: 1. Time response of Second order system 2. Characteristics of Synchros 3. Programmable logic controller – Study and verification of truth tables of logic gates, simple Boolean expressions and application of speed control of motor. 4. Effect of feedback on DC servo motor 5. Transfer function of DC motor 6. Effect of P, PD, PI, PID Controller on a second order systems 7. Lag and lead compensation – Magnitude and phase plot 8. Transfer function of DC generator 9. Temperature controller using PID 10. Characteristics of magnetic amplifiers 11. Characteristics of AC servo motor Any two simulation experiments are to be conducted:- 1. PSPICE simulation of Op-Amp based Integrator and Differentiator circuits. 2. Linear system analysis (Time domain analysis, Error analysis) using MATLAB. 3. Stability analysis (Bod...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITYHYDERABAD III Year B.Tech EEE I-Sem  ELECTRICAL MACHINES LAB – II The following experiments are required to be conducted as compulsory experiments: 1. O.C. & S.C. Tests on Single phase Transformer 2. Sumpner’s test on a pair of single phase transformers 3. Scott connection of transformers 4. No-load & Blocked rotor tests on three phase Induction motor 5. Regulation of a three –phase alternator by synchronous impedance & m.m.f. methods 6. V and Inverted V curves of a three—phase synchronous motor. 7. Equivalent Circuit of a single phase induction motor 8. Determination of Xd and Xq of a salient pole synchronous machine In addition to the above eight experiments, atleast any two of the following experiments are required to be conducted from the following list: 1. Parallel operation of Single phase Transformers 2. Separation of core losses of a single phase transformer 3. Brake test on three phase Induction Motor 4. ...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD III Year B.Tech EEE I-Sem LINEAR SYSTEMS ANALYSIS UNIT-I STATE VARIABLE ANALYSIS Choice of state variables in Electrical networks-Formulation of state equations for Electrical networks-Equivalent source method.Network topological method - Solution of state equations-Analysis of simple networks with state variable approach. UNIT–II FOURIER SERIES AND FOURIER TRANSFORM REPRESENTSATION Introduction, Trigonometric form of Fourier series, Exponential form of Fourier series, Wave symmetry, Fourier integrals and transforms, Fourier transform of a periodic function , Properties of Fourier Transform , Parseval’s theorem , Fourier transform of some common signals, Fourier transform relationship with Laplace Transform. UNIT-III APPLICATIONS OF FOURIER SERIES AND FOURIER TRANSFORM REPRESENTATION Introduction, Effective value and average values of non sinusoidal periodic waves, currents, Power Factor, Effects of harmonics, Application in...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, HYDERABAD III Year B.Tech EEE I-Sem ELECTRICAL MACHINES - III Objective : This subject is an extension of previous machines courses. It deals with the detailed analysis of Synchronous generators and motors which are the prime source of electrical power generation and its utilities. Also concerns about the different types of single phase motors which are having significant applications in house hold appliances and control systems. UNIT – I Construction and Principle of operation Constructional Features of round rotor and salient pole machines – Armature windings – Integral slot and fractional slot windings; Distributed and concentrated windings – distribution, pitch and winding factors – E.M.F Equation. UNIT-II Synchronous Generator Characteristics Harmonics in generated e.m.f. – suppression of harmonics – armature reaction - leakage reactance – synchronous reactance and impedance – experimental determination - phasor diagram – load char...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD III Year B.Tech EEE I-Sem  POWER ELECTRONICS Objective : With the advent of semiconductor devices, revolution is taking place in the power transmission distribution and utilization. This course introduces the basic concepts of power semiconductor devices, converters and choppers and their analysis. UNIT – I POWER SEMI CONDUCTOR DEVICES Thyristors – Silicon Controlled Rectifiers (SCR’s) – BJT – Power MOSFET – Power IGBT and their characteristics and other thyristors – Basic theory of operation of SCR – Static characteristics – Turn on and turn off methods- Dynamic characteristics of SCR - Turn on and Turn off times -Salient points UNIT – II DEVICES AND COMMUTATION CIRCUITS Two transistor analogy – SCR - UJT firing circuit ––– Series and parallel connections of SCR’s – Snubber circuit details – Specifications and Ratings of SCR’s, BJT, IGBT - Numerical problems – Line Commutation and Forced Commutation circuits. UNIT – ...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY,HYDERABAD III Year B.Tech EEE I-Sem  POWER SYSTEMS-II Objective : This course is an extension of Power systems-I course. It deals with basic theory of transmission lines modeling and their performance analysis. Also this course gives emphasis on mechanical design of transmission lines, cables and insulators. UNIT-I Transmission Line Parameters Types of conductors - calculation of resistance for solid conductors - Calculation of inductance for single phase and three phase, single and double circuit lines, concept of GMR & GMD, symmetrical and asymmetrical conductor configuration with and without transposition, Numerical Problems. Calculation of capacitance for 2 wire and 3 wire systems, effect of ground on capacitance, capacitance calculations for symmetrical and asymmetrical single and three phase, single and double circuit lines, Numerical Problems. UNIT-II Performance of Short and Medium Length Transmission Lines Classif...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY,HYDERABAD III Year B.Tech EEE I-Sem ELECTRICAL MEASUREMENTS Objective : Electrical measurements course introduces the basic principles of all measuring instruments. It also deals with the measurement of RLC parameters voltage, current Power factor, power, energy and magnetic measurements. UNIT-I Measuring Instruments  Classification – deflecting, control and damping torques – Ammeters and Voltmeters – PMMC, moving iron type instruments – expression for the deflecting torque and control torque – Errors and compensations, extension of range using shunts and series resistance. Electrostatic Voltmeters-electrometer type and attracted disc type – Extension of range of E.S. Voltmeters. UNIT –II Instrument transformers CT and PT – Ratio and phase angle errors – design considerations Type of P.F. Meters – dynamometer and moving iron type – 1-ph and 3-ph meters – Frequency meters – resonance type and Weston type – synchroscopes. UNIT –III ...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD III Year B.Tech EEE I-Sem COMPUTER SYSTEM ORGANIZATION Objective: • Is to acquaint budding engineers with the basic principles of organization, operation and performance of modern-day computer systems. • It covers all aspects of computer technology, from the underlying integrated circuit technology used to construct computer components, to the use of parallel organization concepts in combining those components. UNIT-I: BASIC STRUCTURE OF COMPUTERS:Computer Types, Functional unit, Basic OPERATIONAL concepts, Bus structures, Software, Performance, multiprocessors and multi computers. Data Representation. Fixed Point Representation. Floating – Point Representation. Error Detection codes. UNIT-II: REGISTER TRANSFER LANGUAGE AND MICROOPERATIONS:Register Transfer language. Register Transfer Bus and memory transfers, Arithmetic Mircrooperatiaons, logic micro operations, shift micro operations, Arithmetic logic shift unit. Ins...

Second year EEE Syllabus For JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD STUDENTS Click The Below Link To Download The Syllabus Third Semester Mathematics III Fluid Mechanics and Hydraulic Machinery Pulse and Digital Circuits Switching Theory and Logic Design Electromagnetic Fields Electrical Machines I Fluid Mechanics and Hydraulic Machinery Lab Electrical Circuits and Simulation Lab 4th semester Managerial Economics and Financial Analysis Environmental Studies Linear and Digital IC Applications Power Systems I Electrical Machines II Control Systems IC and Pulse and Digital Circuits Lab Electrical Machines Lab – I

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY,HYDERABAD II Year B.Tech EEE II-Sem  ELECTRICAL MACHINES LAB – I The following experiments are required to be conducted compulsory experiments: 1. Magnetization characteristics of DC shunt generator. Determination of critical field resistance and critical speed. 2. Load test on DC shunt generator. Determination of characteristics. 3. Load test on DC series generator. Determination of characteristics. 4. Load test on DC compound generator. Determination of characteristics. 5. Hopkinson’s test on DC shunt machines. Predetermination of efficiency. 6. Fields test on DC series machines. Determination of efficiency. 7. Swinburne’s test and speed control of DC shunt motor. Predetermination of efficiencies. 8. Brake test on DC compound motor. Determination of performance curves. In addition to the above eight experiments, atleast any two of the experiments from the following list are required to be conducted: 9. Brake test on DC shun...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, HYDERABAD I.C. AND PULSE AND DIGITAL CIRCUITS LAB     1.      Linear  wave shaping 2.      Non Linear Wave Shaping – Clippers 3.      Non Linear Wave Shaping – Clampers 4.      Study of Logic Gates & Some Applications 5.      Astable Multivibrator, Monostable Multivibrator using transistors 6.      Bistable Multivibrator, Schmit Trigger using transistors 7.      IC 741 OP AMP Applications – Adder, Integrator and Differentiator Circuits 8.      Active Filters – LPF, HPF (first order) 9.      Function Generator using 741 OP AMP 10.    IC 555 Timer – Monostable Operation Circuits, Astable Operation Circuits 11.    Schmitt Trigger Circuits – Using IC 741 and IC 555 12.    Voltage Regulat...

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY   HYDERABAD                 CONTROL SYSTEMS Objective :   In this course it is aimed to introduce to the students the principles and applications of control systems in every day life.   The basic concepts of block diagram reduction, time domain analysis solutions to time invariant systems and also deals with the different aspects of stability analysis of systems in frequency domain and time domain. UNIT – I INTRODUCTION   Concepts of Control Systems- Open Loop and closed loop control systems and their differences- Different examples of control systems- Classification of control systems, Feed-Back Characteristics, Effects of feedback.   Mathematical models – Differential equations,   Impulse Response and transfer functions - Translational and Rotational mechanical systems   UNIT II    T...